Inthe class Modular Cutter
Inthe class Modular Cutter | |
---|---|
Versatile Spaceport Utility Cutter from Inthe (world) | |
Type: UMC Modular Cutter | |
Category | Smallcraft |
Size | 50 Tons |
Hull Configuration | Cylinder Hull |
Streamlining | Streamlined Hull |
Tech Level | TL–8 |
Engineering | |
Computer | Model/1 |
Jump | J-0 |
Maneuver | 2 G |
Armaments | |
Hardpoints | 1 |
Accommodations | |
Staterooms | 0 |
Personnel | |
Crew | 2 |
Officers | 1 |
Enlisted | 1 |
High/Mid Passengers | 0 |
Payload | |
Cargo | 30.0 Tons |
Fuel tank | 0 Tons |
Construction | |
Origin | Third Imperium |
Year Operational | Unknown |
End of Service | Still in active service. |
Price | |
Cost | MCr15.64 |
Statistics | |
Quick Ship Profile | UMB-5S60 |
Images | |
Blueprint | Yes |
Illustration | Yes |
Source | |
Also see | Utility Craft - Modular Ship |
Canon | Published, fan design |
Era | 1105 |
Reference | GURPS Traveller: Modular Cutter |
Starships are designed with the Classic Traveller format, using High Guard. |
The Inthe class Modular Cutter is a noncombatant smallcraft.
- It is a civilian ship, a Utility Craft, and a Modular Cutter.
Description (Specifications)
The concept behind the Modular Cutter is to carry a 30tn pressurized cargo container or a modifiable module from orbit to surface & back. Variations on the theme are widespread throughout Imperial space, taking into account local tech levels, payloads, maintenance needs, endurance and performance.
The Inthe Modular Cutter is a low cost, low tech utility vehicle intended for short duration Spaceport or Starship operations. Reliability is enhanced by Inthe's TL–9 shipyard utilizing TL–8 technologies, this also broadens the potential customer base to 6 out of 10 worlds within the Paya J1 Cluster and reduces maintenance to a minimum. Purchase on the remaining 4 very low tech worlds is aided by extensive maintenance contracts. Carries interchangeable 30tn cargo containers or modified modules.
Manoeuvre is restricted to MD-2 with or without a container or module on board for safety. (Reducing stress on the ships structure when unloaded).
Most yards use Oberlindes Lines to deliver your new Cutter to your home Spaceport, contact your preferred shipyard for details.
Not intended to supplement planetary defenses, the Cutter cannot carry weapon systems.
Image Repository
No information yet available.
Basic Ship Characteristics
Following the Imperial Navy and IISS Universal Ship Profile and data, additional information is presented in the format shown here. The small craft factor indicates the number of squadrons (of ten craft) carried on the ship. Tonnage on the universal ship profile is shown in kilotons (thousands of tons) when necessary. [1]
Basic Ship Characteristics [2] | ||
---|---|---|
No. | Category | Remarks |
1. | Tonnage | 0-99 tons. |
2. | Crew | x1 crew. |
3. | Performance | Propulsion:
|
4. | Electronics | Model/TBD fib computer. |
5. | Hardpoints | xTBD hardpoints. |
6. | Armament | Offensive Equipment: The normal weapons fit-out for it is:
|
7. | Defenses | Defensive Equipment:
|
8. | Craft | None |
9. | Fuel Treatment | None |
10. | Cost | MCrTBD. |
11. | Construction Time | TBD months to build, TBD months in quantity. |
12. | Comments | Other Equipment:
|
History & Background (Dossier)
The modular Cutter is a well established concept throughout the Imperium. The origins of the original design are long lost, however each shipyards design and construction makes each variant unique, if sometimes only in the smaller details. Several private concerns on Inthe build Modular Cutters, including high tech (TL9) variants, however the tech 8 variant has been produced for far longer and is still the mainstay.
Users
TL-8 Modular Cutters are common in the Paya Cluster, mostly imported and occasionally constructed on several worlds despite having no shipyards (Wochiers, Rethe, Treece). Inthe's TL9 version offers similar performance and more crew/passenger comfort. Where imported, TL9 maintenance is often performed by Inthe Engineers visiting the home world under on-going maintenance contracts (costing 20% of the purchase price per year).
- A TL–14 variant built on Macene (Spinward Marches 2612) costing 10.84MCr or 13.44MCr for a MD3 variant is available but rarely seen in the cluster, they are often old before their time, worn out due to the difficulties of repair & maintenance. Many operating away from Macene fall into disrepair within a decade or so, earning them a reputation of being flashy but lacking in reliability. Intuitive controls are designed to make pilot cross training from TL8+ to the TL14 craft relatively straight forward.
- A few TL–14 hulls in the cluster have been retro-fitted with TL8/9 equipment, which usually involves welding a module permanently to the cutter and re-configuring the internal space to accommodate the older tech drives and equipment.
- Belters often take up sold off Cutters, utilizing the module space for extended Belter operations.
Containers & Modules
- Cargo. The most common use for the Cutter is cargo transport, moving cargo containers (open, closed, pressurised or not, refrigerated, grain, liquids, gas, high security, etc) from Oberlindes ships (surface to orbit) or between cities (surface to surface). Cargo containers are usually sealed and not accessible by the cutters flight crew. A cargo module (open or pressurised) is accessible and is used when moving loose cargos.
- Passenger Module. Fitted to provide seating for 100 passengers, fresher facilities, a kitchen serving pre-prepared refreshments and meals and 5 in-flight Stewards. Utilised most often in surface to surface (city to city) passenger transport and Highport to Downport where a Highport is present.
- Passenger/Cargo Module. Not considered as efficient as specialised modules, but often seen servicing orbiting facilities or remote surface locations (eg: mining or scientific stations).
- Belter Module. Highly customised, Belter cutters are as individual as the Belters themselves. Usually incorporating extra fuel, a stateroom, a large cargo bay and a manually operated mining laser.
Numerous other variants exist within the Imperium, within a low tech cluster however it is rare to see other than these four in common use.
Criticisms
Within its intended purposes, the Modular Cutter performs well. Criticisms usually relate to the capability of specific shipyards to deliver a fault free ship. Fortunately competition with the Paya Cluster is strong, encouraging for the most part good quality constructions. Custom builds on planets with little shipyard infrastructure can be troublesome when it comes to maintenance .
Class Naming Practice/s & Peculiarities
No information yet available.
Selected Variant Types & Classes
Civilian Ship - Smallcraft - Utility Craft - Cutter:
References & Contributors (Sources)
This article has metadata. |
This article is missing content for one or more detailed sections. Additional details are required to complete the article. You can help the Traveller Wiki by expanding it. |
- Marc Miller, Frank Chadwick, John Harshman. High Guard (Game Designers Workshop, 1980), 20-37. (Design Sequence Used)
- GURPS Traveller: Modular Cutter
- Traveller Wiki Editorial Team
- Author & Contributor: Lord (Marquis) and Master of Sophontology Maksim-Smelchak of the Ministry of Science
- ↑ Timothy B. Brown. Fighting Ships (Game Designers Workshop, 1981), 10.
- ↑ Timothy B. Brown. Fighting Ships (Game Designers Workshop, 1981), 10.