Deck Plan

A Deck Plan is a schematic or blueprint of a sophontic object, typically a ship, smallcraft, or vehicle.

• It is a central feature of Naval Architecture.

Description (Specifications)

The creation of starship deck plans is based on the assumption that one ton of mass displacement equals fourteen cubic meters. The standard displacement ton used for these calculations is derived from the volume of liquid hydrogen, the fuel source for most standard star faring vessels.

The square grid scale used on most deck plans is 1.5 meters on a side. Clearance between decks is normally 3 meters. This means that two floor squares, extended floor to ceiling, equals four 1.5 meter cubes or nearly 14 cubic meters (1.5 x 1.5 x 1.5 x 4 = 13.5 cubic meters), or one ton. A 100 dton starship would thus contain approximately two hundred grid squares within.

Allowances of approximately + or - 10% were made in most areas to allow for better representation of specific parts of the ship and to cover various anomalies. For example, crew quarters call for four tons per sophont: the actual tonnage allocated on many plans is often less than that, but additional area is devoted to communal areas such as galley, mess, wardroom, and recreation areas.

Also, a limited volume of passages has been added to some starships. Passages and access ways which have no other use may be safely added to a ship without affecting volume or displacement for construction purposes. These additional passages should amount to no more than an additional 10% of the ship's total volume.

Image Repository

No information yet available.

Interior Details

Interior Details: The specific interior fittings for ships are fairly standardized, and are shown on the deck plan symbols chart and on many of the individual ship plans as well:

1. Airlock
2. Bulkhead Wall AKA Bulkhead
3. Cargo Hold
   1. Cargo Container
   2. Modular Cargo Container
4. Fuel Scoop
5. Hardpoint AKA Ship's Hardpoint
6. Hatchway
7. Hull
8. Interior Wall
9. Iris Valve
10. Landing Gear
11. Lift Shaft
12. Maintenance Hatch
13. Manual Hatch
14. Refrigerated Hold
15. Secret Cargo Hold
16. Ship Environmental Control
17. Ship Life Support
18. Sliding Door
19. Standard Door
20. Viewport

Interior Fittings

The plans show various furnishings and fittings which appear within the ship:

1. Common Room
2. Emergency Locker
3. Fresher
4. Galley
5. Grav Plate
6. Head
7. Hydroponics
8. Inertial Compensator
9. Lab Space
10. Life Support
11. Low Berth AKA Cryo Capsule (Cold Sleep)
12. Mail Vault
13. Mess
14. Ordinance Locker
15. Secure Locker
16. Ship Furnishing
17. Ship's Locker
18. Ship's Magazine
19. Ship Module
20. Sick Bay
21. Spin Habitat
22. Stateroom

History & Background (Dossier)

Deck plans, blueprints, engineering schematics... they are all part of successful engineering design and documentation practices. Every successful and technically competent sophont society uses them. And naval architects use them extensively. The Travellers' Naval Architecture Society mandates the use of deck plans throughout Charted Space and is the dominant regulatory body for space and starship architecture across polities, sophont species, and the greater, shared interstellar civilization.

References & Contributors (Sources)

This list of sources was used by the Traveller Wiki Editorial Team and individual contributors to compose this article. Copyrighted material is used under license from Far Future Enterprises or by permission of the author. The page history lists all of the contributions.

• Jordan Weisman. "Book 2." Adventure Class Ships Volume 1 (1982): 3-6.
• Marc Miller. T5 Core Rules (Far Future Enterprises, 2013), TBD.
• Traveller Wiki Editorial Team
• Author & Contributor: Lord (Marquis) and Master of Sophontology Maksim-Smelchak of the Ministry of Science