Difference between revisions of "Ton"

From Traveller Wiki - Science-Fiction Adventure in the Far future
Jump to navigation Jump to search
(23 intermediate revisions by one other user not shown)
Line 1: Line 1:
 
[[File: Imperial Sunburst-Sun-IISS-Traveller.gif|right]]
 
[[File: Imperial Sunburst-Sun-IISS-Traveller.gif|right]]
[[Ton]] has two meanings.
+
A [[Ton]] is both a measure of volume and a measure of mass or weight.
# A unit of volume equal to 13.5 cubic meters. It is derived from the volume of a ton (mass) of liquid hydrogen, the fuel used by starships.
+
* It is a standard [[Third Imperium|Imperial]] [[metric]].
# [[wikipedia:Ton|Ton]] (or tonne) is a unit of mass equal to one thousand kilograms.
+
# 1.0 [[Kton]] (kiloton) = 1,000.0 tons or sTons (standard tons).
+
== Description ([[Specifications]]) ==
# [[DTon]] = Dimensional or Displacement Ton
+
Ton has two meanings:
 +
 
 +
''Volume''
 +
 
 +
A Ton as a unit of volume is equal to between 13.5 and 14.0 [[Kiloliter|cubic meter]]s. It is derived from the volume of a ton (mass) of liquid [[hydrogen]], the [[Ship Fuel|fuel]] used by [[starship]]s.
 +
* [[DTon]] or [[dTon]] = Dimensional or Displacement Ton.
 +
* Standard [[Third Imperium|Imperial]] abbreviations include [[DTon]], [[dTon]] and dT.
 +
 
 +
''Weight''
  
== Description ([[Specifications]]) ==
+
A [[wikipedia:Ton|Ton]] (or tonne) is a unit of mass equal to one thousand [[kilogram]]s.
Where it is important to distinguish between the two the former is refered to as a ''dTon'' (for displacement Ton) and the latter as an ''sTon'' (for standard Ton).
+
* The standard [[Third Imperium|Imperial]] abbreviation is T.
 +
 
 +
The foundation of the [[starship]] is the [[hull]], into or onto which all other [[Ship Equipment|component]]s are placed. [[Hull]]s are identified by their mass displacement (expressed in tons; one ton equals approximately 14 [[Kiloliter|cubic meter]]s) and by their configuration.{{Page cite|name= High Guard |page=21-22 |version=Classic Traveller}}
  
''[[Hull|The Hull]]:'' The foundation of the [[starship]] is the [[hull]], into or onto which all other [[Ship Equipment|component]]s are placed. [[Hull]]s are identified by their mass displacement (...expressed in tons; one ton equals 14 cubic meters) and by their configuration.{{Page cite|name= High Guard |page=21-22 |version=Classic Traveller}}
+
Ships may be very large and for convenience have their masses measured in kilotons (abbreviated to [[Kton]]s), a unit equal to 1,000.0 standard tons.
  
 
== History & Background ([[Dossier]]) ==
 
== History & Background ([[Dossier]]) ==
The creation of starship [[deck plan]]s is based on the assumption that one ton of mass displacement equals fourteen cubic meters. The standard [[displacement ton]] used for these calculations is derived from the volume of liquid [[hydrogen]], the [[fuel]] source for most standard star faring [[vessel]]s.{{Page cite|name= Adventure Class Ships Volume 1 |page= 3 |article= Book 2 |version= Classic Traveller}}  
+
The creation of starship [[deck plan]]s is based on the assumption that one ton of mass displacement equals fourteen [[Kiloliter|cubic meter]]s. The standard [[displacement ton]] used for these calculations is derived from the volume of liquid [[hydrogen]], the [[fuel]] source for most standard star faring [[vessel]]s.{{Page cite|name= Adventure Class Ships Volume 1 |page= 3 |article= Book 2 |version= Classic Traveller}}  
  
The square grid scale used on most deck plans is 1.5 meters on a side. Clearance between decks is normally 3 meters. This means that two floor squares, extended floor to ceiling, equals four 1.5 meter cubes or nearly 14 cubic meters (1.5 x 1.5 x 1.5 x 4 = 13.5 cubic meters), or one ton. A 100 [[dton]] [[starship]] would thus contain approximately two hundred grid squares within.{{Page cite|name= Adventure Class Ships Volume 1 |page= 3 |article= Book 2 |version= Classic Traveller}}  
+
The square grid scale used on most deck plans is 1.5 meters on a side. Clearance between decks is normally 3 [[meter]]s. This means that two floor squares, extended floor to ceiling, equals four 1.5 [[Kiloliter|meter cube]]s or nearly 14 [[Kiloliter|cubic meter]]s (four lots of 1.5 [[Meter|m]] x 1.5 [[Meter|m]] x 1.5 [[Meter|m]] = 13.5 [[Kiloliter|cubic meter]]s), or one ton. A 100 [[dTon]] [[starship]] would thus contain approximately two hundred grid squares within.{{Page cite|name= Adventure Class Ships Volume 1 |page= 3 |article= Book 2 |version= Classic Traveller}}  
  
 
Allowances of approximately + or - 10% were made in most areas to allow for better representation of specific parts of the ship and to cover various anomalies. For example, [[crew quarter]]s call for four tons per [[sophont]]: the actual tonnage allocated on many plans is often less than that, but additional area is devoted to communal areas such as [[galley]], [[mess]], [[wardroom]], and [[recreation area]]s.{{Page cite|name= Adventure Class Ships Volume 1 |page= 3 |article= Book 2 |version= Classic Traveller}}  
 
Allowances of approximately + or - 10% were made in most areas to allow for better representation of specific parts of the ship and to cover various anomalies. For example, [[crew quarter]]s call for four tons per [[sophont]]: the actual tonnage allocated on many plans is often less than that, but additional area is devoted to communal areas such as [[galley]], [[mess]], [[wardroom]], and [[recreation area]]s.{{Page cite|name= Adventure Class Ships Volume 1 |page= 3 |article= Book 2 |version= Classic Traveller}}  
  
Also, a limited volume of passages has been added to some [[starship]]s. Passages and access ways which have no other use may be safely added to a ship without affecting volume or displacement for construction purposes. These additional passages should amount to ho more than an additional 10% of the ship's total volume.{{Page cite|name= Adventure Class Ships Volume 1 |page= 4 |article= Book 2 |version= Classic Traveller}}
+
Also, a limited volume of passages has been added to some [[starship]]s. Passages and access ways which have no other use may be safely added to a ship without affecting volume or displacement for construction purposes. These additional passages should amount to no more than an additional 10% of the ship's total volume.{{Page cite|name= Adventure Class Ships Volume 1 |page= 4 |article= Book 2 |version= Classic Traveller}}
  
 
== References & Contributors (Sources) ==
 
== References & Contributors (Sources) ==

Revision as of 19:37, 12 February 2019

Imperial Sunburst-Sun-IISS-Traveller.gif

A Ton is both a measure of volume and a measure of mass or weight.

Description (Specifications)

Ton has two meanings:

Volume

A Ton as a unit of volume is equal to between 13.5 and 14.0 cubic meters. It is derived from the volume of a ton (mass) of liquid hydrogen, the fuel used by starships.

Weight

A Ton (or tonne) is a unit of mass equal to one thousand kilograms.

  • The standard Imperial abbreviation is T.

The foundation of the starship is the hull, into or onto which all other components are placed. Hulls are identified by their mass displacement (expressed in tons; one ton equals approximately 14 cubic meters) and by their configuration.[1]

Ships may be very large and for convenience have their masses measured in kilotons (abbreviated to Ktons), a unit equal to 1,000.0 standard tons.

History & Background (Dossier)

The creation of starship deck plans is based on the assumption that one ton of mass displacement equals fourteen cubic meters. The standard displacement ton used for these calculations is derived from the volume of liquid hydrogen, the fuel source for most standard star faring vessels.[2]

The square grid scale used on most deck plans is 1.5 meters on a side. Clearance between decks is normally 3 meters. This means that two floor squares, extended floor to ceiling, equals four 1.5 meter cubes or nearly 14 cubic meters (four lots of 1.5 m x 1.5 m x 1.5 m = 13.5 cubic meters), or one ton. A 100 dTon starship would thus contain approximately two hundred grid squares within.[3]

Allowances of approximately + or - 10% were made in most areas to allow for better representation of specific parts of the ship and to cover various anomalies. For example, crew quarters call for four tons per sophont: the actual tonnage allocated on many plans is often less than that, but additional area is devoted to communal areas such as galley, mess, wardroom, and recreation areas.[4]

Also, a limited volume of passages has been added to some starships. Passages and access ways which have no other use may be safely added to a ship without affecting volume or displacement for construction purposes. These additional passages should amount to no more than an additional 10% of the ship's total volume.[5]

References & Contributors (Sources)

This article has metadata.
62px-Information icon.svg.png This article is missing content for one or more detailed sections. Additional details are required to complete the article. You can help the Traveller Wiki by expanding it.
This list of sources was used by the Traveller Wiki Editorial Team and individual contributors to compose this article. Copyrighted material is used under license from Far Future Enterprises or by permission of the author. The page history lists all of the contributions.